Description
We are an authorized retailer for Kegco
This K199B-2NK Full Size Keg Beer Refrigerator from Kegco houses your kegs in a beautiful all-black cabinet and comes equipped with a dual tap draft tower. It also comes with two removable wire shelves that allow you to convert this keg fridge into an all-refrigerator or beverage center when you need additional cold storage. 2-1/2" casters let you move the beer keg dispenser anywhere you need it, from the bar to the living room to the patio.
Kegco has packed this K199B-2NK with many convenient features that give you the most for your money. A steel interior floor mat ensures long-lasting durability, while also allowing your kegs to glide easily when sliding them in and out of the cabinet. The textured serving countertop has an attractive metal safety rail that keeps your glasses and beer mugs from sliding off, and the easy-to-clean removable drip tray collects drips and spills to keep cleaning to a minimum. This beer cooler was designed to be ultra-quiet and 25% more energy efficient, making it ideal for use in the home.
This beer cooler was designed to be ultra-quiet and 25% more energy efficient, making it ideal for use in the home. This keg cooler can accommodate one full size, straight pony, or quarter slim keg, or up to two sixth slim, strap handle, or rubber home brew kegs. PLEASE: It will not fit bevel or rubber kegs that are wider in the middle than at the top or bottom. These are commonly used by Coors and Miller brewing companies.
Features:
- MDK-199B-01 Kegerator with Dual Faucet Dispense System
-
Includes a brand new 5 lb. Aluminum CO2 Tank
This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada markings. The 320 valves are CGA approved, and have a male thread for CO2 regulators. An average fill is good for 5-6 kegs depending upon your fill. -
Includes Commercial Grade Dual Gauge Two Product CO2 Regulator
The regulator works with any CO2 tank with a CGA-320 valve and measures PSI, as well as the volume of the CO2 gas in the cylinder. It has a pressure release valve and a large hand control which makes it easy to adjust the pressure inside the keg. -
Includes two 5 foot lengths of 5/16 Inch I.D. Blue Air Line Assembly with 2 Snap Clamps
These standard 5 foot lengths of 5/16" I.D. blue air/CO2 tubing is made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. Each air line assembly comes with two plastic snap clamps with a reusable clamp design. -
Includes two D system lever handle keg couplers
These commercial grade lever handle keg couplers work with all American "D" system Sankey kegs. They feature 55-psi pressure relief valves and nickel-plated forged brass bodies. To tap a keg, simply pull out and then down on the lever handle. -
Includes a Kegco Exclusive 14" Tall, 3" Diameter Dual Faucet Polished Stainless Steel Draft Tower
This NSF-approved tower is a 3" diameter dual faucet metal draft tower made of polished stainless steel. It comes complete with two stainless steel faucets and two 5 foot lengths of 3/16" I.D. clear beer tubing. This tower is mounted using the gasket and four screws that are included. This Kegco Exclusive tower measures 14" tall, giving you an extra 2" of space over standard draft beer towers to allow you to easily fill tall growlers and pint glasses. - PLEASE NOTE: Coors Kegs will not fit into this Kegerator.
- Measures at 33"H x 20"W x 25.5"D
- Reversible Door
- the Kegco K199B-1 Beer Dispenser comes with 2 full-width wire shelves and a hole plug which allows you to convert kegerator into a Compact Refrigerator.
- Includes 2 Full-width Wire Shelves
- Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal)
- Maximum Ambient Temperature: 100 degrees Fahrenheit
- Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
- Removable Drip Tray with Grill to Collect spills
- Chrome Guard Rail to Protect Your Mugs and Glasses from Sliding Off
- Steel interior floor mat for long lasting durability and easy glide of beer keg.
- Textured serving counter top.
- 25% more energy efficient design saves you money each month
- UL Listed
Warranty Information:
- 1 Year Parts and Labor
- 5 Years on Compressor (parts only)
Specification
Dimensions
|
|
---|---|
Height | 33" |
Width | 20' |
Depth | 25 1/2" |
Weight
|
|
Unit Weight | 97 lbs |
Shipping Weight | 110 lbs |
Warranty
|
|
Labor | 1 Year |
Parts | 1 Year |
Compressor (Parts Only) | 5 Years |
Key Features
|
|
Built-in Capable | No |
Security Lock | No |
Keg Coupler | D System |
Regulator | Dual Gauge Two Product |
CO2 Tank | 5 lb. |
Cleaning Kit | Optional Add-On |
Outdoor Use | No |
Commercial Use | No |
Keg Storage Capacities
|
|
Full Size / 1/2-Barrel | Holds 1 |
Pony Size / 1/4-Barrel | Holds 1 |
1/4-Barrel Slim | Holds 1 |
1/6-Barrel | Holds 2 |
5 gal. Ball/Pin Lock Keg | Holds 2 |
5-Liter / Mini Keg | Holds 2 |
Exterior
|
|
Cabinet | Black Cabinet |
Drip Tray | Yes |
Guard Rail | Yes |
Casters | Yes |
Draft Beer Tower
|
|
Number of Faucets | 2 Faucet |
Material | Stainless Steel |
Height | 12.25" |
Diameter | 3" |
Door
|
|
Color / Material | Stainless Steel |
Number of Doors | 1 |
Door Handle | Recessed |
Field Reversible | Yes |
Accepts Custom Overlay Panel | No |
Cooling System
|
|
Type | Compressor |
Front Ventilation | No |
Controls
|
|
Adjustable Thermostat | Yes |
Digital | No |
Electrical
|
|
Electrical Requirements | 115 V, 60 Hz |
6 great reasons to buy from us:
- Fast, Free Shipping
- Safe & Secure Checkout
- Easy Returns
- Product Guarantees
- Financing Options
- Top Customer Service