7 Tips in Keeping Your Beverage Fridge Last Longer

7 Tips in Keeping Your Beverage Fridge Last Longer

A beverage cooler fridge is an excellent investment that comes with lots of benefits. Naturally, you want to be able to use it for a long time. Although the brand influences quality and longevity, there are still ways you can do to keep your fridge working for a longer time.  

Read on to know more about the best ways to maintain your beverage cooler so it can continue to operate smoothly. 


1. Carefully Read and Follow the Manual

Manuals are made to specifically highlight how you should handle the beverage fridge to ensure your and the unit’s safety. There are instructions in the document on how you should properly install, operate, and care for the appliance. In case there would be problems, you can check the manual for troubleshooting solutions and potential causes of the problems. 

If you want your fridge to last longer, make sure to carefully read everything and follow the guidelines the manufacturer has laid out for users like you. 

But, if you’re unsure or everything’s too complicated for you, hire professionals to do it. For example, if you're not sure if you can properly install it, you should get help from someone experienced. If you have a problem that needs more troubleshooting than you can do, hire a professional. This way you can avoid damaging the fridge more and shortening its lifespan.

2. Ensure It Has Enough Ventilation

Make sure there aren’t any blockages around the fridge, especially near its vents. This is true for both the insides and outsides of the fridge. 

Airflow is very important in keeping your fridge running smoothly. Cold air should be maintained inside the fridge to keep your beverages cool at the set temperature. To successfully do that, hot air should be removed from the unit. This hot air must be able to safely escape through the vents. 

This is why it’s important to place or install the beverage cooler in a way that there’s enough ventilation or air circulation around the unit. If you’re using a freestanding unit, you need to position it inches away from the wall or from anything that may stand too close to its rear or side vents. 

Without enough surrounding space, the heat that the fridge is trying to dissipate will be trapped in the area. This will force your fridge to work harder so it can keep the unit cool. If your fridge constantly has to work harder, its lifespan will be shortened, especially its compressor. 

3. Clean Regularly

Clean the fridge inside and out regularly. Regular maintenance will work best in keeping your appliance last longer. Here’s a common procedure on how to properly clean your beverage fridge:

  1. Turn off the power of the fridge and unplug it. 
  2. Remove everything inside: the beverages and the shelves. 
  3. Make a solution of warm water and baking soda or a mix of mild dish detergent and water. 
  4. Wash the inside surfaces with a cloth or a sponge and any of the two solutions. Clean out loose debris and wipe any spill properly.
  5. Dry it with a clean dry cloth.
  6. Do the same steps for the exterior parts of the unit.
  7. For the removed shelves, wash them with the solution as well. 
  8. When everything’s clean and dry, put everything back. 

It’s important to keep in mind to not use any abrasive tool when cleaning the fridge. Don’t use steel wool or a steel brush, especially on the stainless steel parts like the coils. 

4. Keep the Beverage Cooler Fridge Full

This may seem counterintuitive but it actually works. When your fridge is full of cold beverages, the cold temperature is maintained throughout the whole unit. This helps the cooler work less. But, if there are large spaces without bottles or cans, there is more space for the fridge to cool, forcing it to work harder to maintain the temperature and airflow. 

At the same time, don’t cram it with too much of what it can handle. Consider the storage capacity of your beverage fridge and make sure to not exceed that number. If you do, the inside will be too cramped for the cold air to flow. Remember that good airflow is important for a refrigerator to operate properly. 

5. Maintain the Seals

The key to maintaining and keeping the temperature inside your refrigerator is its seal. Also called a gasket, the seal is located along the inner edge of the fridge door. It keeps the cold air inside and prevents the warm air from entering. 

Gaps or leaks in this seal can affect the temperature and allow bacteria to enter the insides. Again, this will force your fridge to work harder to make up for the temperature change. This is why it’s important to always check the seals. 

You need to keep it maintained by cleaning it and making sure it’s not loose. To check if it’s loose, do this: 

  • Stick half of a dollar bill into the fridge door and close it. 
  • If the bill easily slips out or down, there’s something wrong with the seal that needs fixing. 

Clean the seal by scrubbing it thoroughly with a sponge and soapy water. This will clean out any debris that may be causing the seal to work properly. However, if the problem persists, seek help from a professional that can help you fix it.

Additionally, look out for any crack or tear in the door seals since the presence of any means you need to replace the seal. 

6. Keep It Away from Heat

As we’ve mentioned, the heat from the inside of the fridge should be able to escape safely. This is to ensure good air circulation inside and prevent the unit from working more. This shows that heat can affect the performance and lifespan of the appliance. 

But, this isn’t the only source of heat for the fridge. Sunlight generates heat. 

If you leave your fridge exposed to direct sunlight for a long period of time, the unit will heat up and the compressors will work in overdrive, which you want to avoid at all costs. With too much heat, the appliance will consume more power and its components will have more workload to accommodate. All of this will cause the fridge to fail and thus shortening its lifespan. 

7. Frequently Check for Signs of Malfunctions

Last but not least, the best way to lengthen the lifespan of your beverage cooler fridge is by taking good care of it. Part of this maintenance is regularly checking and looking out for signs of malfunctions with the unit. 

Keep in mind that if the malfunctions are too complicated or technical for you, hire a professional to fix the problem. Don’t force it because you might damage the unit more and even hurt yourself. 

For your knowledge, here are some telltale signs of a malfunctioning beverage cooler: 

Louder than Usual

If your fridge produces noise louder than normal, there’s probably something wrong with it. Your fridge shouldn’t make any type of loud noise. Here are some reasons behind this loud noise: 

  • The unit’s tubing is touching other parts. 
  • The fan blade is broken or bent. 
  • There are loose components. 
  • The bearings of the fan motor are worn out. 

If you can’t solve the problem on your own, seek professional help. Take note of how loud the noise is and how frequent. 

It’s Not Cooling Properly

Inefficient cooling is a common problem encountered with beverage refrigerators. This can be due to a problem with your power supply or compressor.  

Power supply issues can be checked by you and may include: 

  • There’s not enough voltage flowing to the refrigerator. 
  • The unit isn’t properly plugged into the outlet or the outlet isn’t working properly. 
  • The circuit is broken or overloaded. 

On the other hand, compressor issues should be checked by an expert and can include: 

  • It’s not humming.
  • It’s humming but not starting. 
  • It’s cycling on and off. 
  • It starts but shuts off after. 

Aside from these two, a related issue to the fridge not cooling properly is the unit taking longer to cool the beverages. Here are some potential causes for this: 

  • The evaporator is iced over and needs defrosting. 
  • The door is opened too frequently. 
  • The evaporator fan is slowly turning.
  • The condenser coils are dirty. 



The key to making your beverage cooler fridge last longer is to take care of it and use it properly. Don’t force it to work harder because of the more workload, the poorer performance, and the shorter the unit’s lifespan. To summarize, here are what you should do so you can use your fridge for a long time: 

  • Read and follow the manufacturer’s manual. 
  • Ensure proper ventilation. 
  • Clean everything regularly. 
  • Keep it full. 
  • Maintain the door seal. 
  • Keep it away from direct sunlight. 
  • Regularly check for signs of malfunctions. 

If you’re interested in looking for new beverage fridges, you can check out our wide range of beer and wine cooler combo products.

1 comment


Hello World! https://apel.top/go/gu4winrshe5dgoju?hs=a9f2314a5b4841e0e2885ea77fc0d290&

Leave a comment